Squares, Marking & Measuring
Call 1-800/790-7980 To Order
Directory:
Marking Gauges
Scratch Awl & Marking Knives
Squares by L.S. Starrett
Dial & Digital Calipers
Mortise & Marking Gauges
By Crown Tools, Sheffield
The Standard gauge has a single pin on one side and a dual-pin mortise gauge
on
on the other. The Deluxe gauge includes a fine tuning knob for the second
mortise
pin. Both gauges are rosewood with brass fittings. Made in England.
| 398-153 |
Mortice & Marking Gauge |
$29.95 |
| 398-154 |
Deluxe Mortice & Marking Gauge |
$49.95 |
Veritas wheel marking gauge.
The round cutter will scribe across the wood and cut cleanly both with
and across the grain.
| 405-N33.21 |
Wheel Marking Gauge |
$35.95 |
| 405-N33.22 |
Graduated Wheel Marking Gauge |
$39.95 |
|
Also Available with a micro-adjustment feature: |
|
| 405-N35.10 |
Marking Gauge- Micro Adj. |
$37.95 |
| 405-N35.20 |
Graduated Marking Gauge- Micro Adj. |
$49.95 |
Marking and scribing tools.
The scratch awl in a traditional European design with rosewood knob.
Japanese knives are single bevel laminated steel, just like Japanese chisels.
White steel edge stays sharp longer, while the wroght iron backing gives
strenght to the edge.
| 398-114R |
Rosewood Awl |
$11.95 |
| 330-01.041.18 |
Right Hand Marking Knife |
$17.95 |
| 330-01.042.18 |
Left Hand Marking Knife |
$17.95 |
| 330-01.040.18 |
Dbl Edge Marking Knife |
$17.95 |
Call 1-800/790-7980 To Order
Engineer's Squares and Stainless Japanese squares for precision tool
set-up.
| 462-19057 |
Engineer's Square-2 in |
$9.95 |
| 462-19059 |
Engineer's Square-4 in |
$13.95 |
| 462-19058 |
Engineer's Square-6 in |
$16.95 |
| 330-15.193.05 |
Combination Mitre Square |
$15.95 |
| 330-15.638 |
Mitre Square |
$10.95 |
Call 1-800/790-7980 To Order
Precision Squares by L.S. Starrett, "World's Finest
Toolmaker"
When you demand the best, Starrett delivers wonderful tools that are
a joy to use. Made in the USA.
All Starrett Combination Squares have hardened cast heads. Blades have
a satin chrome finish that is deeply etched for years of service.
Scales are 4R, reading 8ths, 16ths, 32nds, and 64ths.
| 335-11H-12 |
Starrett 12 in Combination Square |
$69.95 |
| 335-11H-18 |
Starrett 18 in Combination Square |
$89.95 |
| 335-11H-24 |
Starrett 24 Combination Square |
$92.95 |
| 335-C11 |
Center Head for Starrett Square |
$24.95 |
| 335-CPNR |
Protractor Head Satin Chrome |
$72.95 |
| 335-11H-X |
12" Square with Centering & Protractor Heads |
$139.95 |
| 335-13A |
Graduated Trysquare 4 in. |
$49.95 |
| 335-13C |
Graduated Trysquare 6 in. |
$63.95 |
| 335-14A |
Graduated Trysquare 2-1/2 in. |
$47.95 |
| 335-TS6 |
Try Square w/ scale |
$17.95 |
Digital & Dial Calipers
All these calipers have a 6" capacity and read in inches (+/- 0.001).
The digital caliper also reads in metric (0.01mm).
| 460-142 |
Plastic Dial Calipers (General Tools) |
$23.99 |
| 460-143 |
Digital Caliper (General Tools) |
$64.95 |
| 171-D1052 |
Stainless Dial Calipers (China) |
$34.95 |
Call 1-800/790-7980 To
Order
CUTTING EDGE HOME PAGE
CATALOG HOME | TURNING | LATHES
| CARVING | HAND TOOLS
|
SHARPENING SUPPLIES |
BOOKS