Call 1-800/790-7980 To Order

(Price List At Bottom of Page)

The finest planes made to exacting standards. Beautifully cast and machined to perform perfectly right out of the box. These tools are made in the Bedrock tradition to provide years of faithful service.

#040-1/2 Scrub Plane

The scrub plane is designed to remove large amounts of wood from rough sawn timbers prior to finishing with a jack and smoothing plane. The massive blade eliminates chatter and gives a beautiful heft to the tool.

---

Stanley Bedrock Style Bench Planes

(Price List At Bottom of Page)

#1 Smoothing Plane

A jewel of a plane for the collector or tool enthusiast. A faithful reproduction of the Bailey #1 patternmaker's smoothing plane, out of production since 1943. The body is 1-1/2" x 5-3/4", with a heavy 1-1/4" iron.

#1 Smoothing Plane
#2 Smoothing Plane - Iron Body
#2 Smoothing Plane - Bronze Body
#3 Smoothing Plane - Iron Body

(Price List At Bottom of Page)

#4 Smoothing Plane - Iron Body
#4 Smoothing Plane - Bronze Body

#5 Jack Plane (2" Iron)
#5-1/2 Jack Plane (2-3/8" Iron)
#5-1/4 Junior Jack Plane (1-3/4" Iron)

The Jack Plane is a favorite for many woodworkers because it can be used as a Jointer on smaller boards, a Fore Plane, or even a Smoothing Plane. The 5-1/2 uses a wider iron favored by some craftsmen because it is interchangable with the # 6 or #7. The Junior Jack was originally make for school shops because it takes a little less energy to push it through the cut.

#6 Fore Plane

The #6 plane is best used to flatten table tops or other wider planks prior to use of a smoothing plane. The wider 2-3/8" iron hogs off wood but requires a little more muscle than a Jack Plane.

(Price List At Bottom of Page)

#7 Jointer Plane

#8 Jointer Plane

Used to prepare board edges for glue-up and flatten large surfaces. The #8 is a NEW entry for the Lie-Nielsen tool line. It is the only #8 currently in production anywhere in this sector of the galaxy.

(Price List At Bottom of Page)

Call 1-800/790-7980 To Order

Low Angle Bench Planes

(Price List At Bottom of Page)

#62 Low Angle Jack Plane

Ideal for planing end grain projects such as butcher block cutting boards and highly figured grain. These single iron planes are reproductions of rare Stanley classics. Fully adjustable throat plate allows very fine shavings.

#164 Low Angle Smoothing Plane.

BEDROCK-STYLE BENCH PLANES

330-28.001	#1 Bronze Smoothing Plane	$195.00
330-28.002.1	#2 Iron Smoothing Plane	$235.00
330-28.002.2	#2 Bronze Smoothing Plane	$235.00
330-28.003	#3 Bronze Smoothing Plane	$275.00
330-28.004.2	#4 Bronze Smoothing Plane	$300.00
330-28.004.1	#4 Iron Smoothing Plane	$250.00
330-28.04.5	#4-1/2 Iron Smooth Plane	$300.00
330-28.040.5	#040.5 Iron Scrub Plane	$145.00
330-28.005	#5 Iron Jack Plane	$300.00
330-28.005.5	#5-1/2 Jack Plane	$325.00
330-28.006	#6 Fore Plane	$350.00
330-28.007	#7 Iron Jointer Plane	$400.00
330-28.008	#8 Iron Jointer Plane	$475.00
330-28.62	#62 Low-angle Jack Plane	$225.00
330-28.164	Low Angle Smoothing Plane	$235.00

CALL 1-800/790-7980 TO ORDER

CUTTING EDGE HOME PAGE

CATALOG HOME | TURNING | LATHES | CARVING | HAND TOOLS |

SHARPENING SUPPLIES | BOOKS

BIRD'S EYE MAPLE