To Order Call 1-800/790-7980

Bench Grinders, Grinding Wheels, & The Wolverine Sharpening System

Turners use tools right from the grinder, without a lot of honing or stropping. These Grinders and stones have performed well in our shop, and I know they will in yours.

JET JBG8A Industrial Bench Grinder
1 HP Ball bearing drive with cast-iron spark deflectors

Delta 23-725 Low Speed
(1850 rpm) Grinder.

Includes 120# White AlOx
wheel, diamond dresser,
and worklight.

Bench Grinders for Tool Sharpening

Grinders & Stands are sent FOB Houston

199-23.725	DELTA 8" Slow Speed Grinder	$199.99
100-JBG8A	JBG-8A Grinder 8 x 1	$199.95
105-JPS2	Cast Iron Grinder Stand	$59.99

White Aluminum Oxide Grinding Wheels

These wheels are recommended for grinding high speed steel turning tools. (Norton 38A- ## -J8VBE w/bushings).

131-N6X100	Norton 38A grinding Wheel-100g -1/2" to 1" arbor hole	$19.95
131-N6X60	Norton 38A Wheel-60g x 6" - 1/2" to 1" arbor hole	$19.95
131-N8X100	Norton 38A grinding Wheel-100g - 1/2" to 1" arbor hole	$29.95
131-N8X60	Norton 38A grinding Wheel-60g - 1/2" to 1" arbor hole	$29.95

NEW! Norton BLUE SG Wheels

131-SG6X100	SG 3X Wheel 6x3/4x1x100g	$32.99
131-SG6X60	SG 3X Wheel 6x3/4x1x60g	$32.99
131-SG8X100	SG 3X Wheel 8x1x1x100g	$44.99
131-SG8X60	SG 3X Wheel 8x1x1x60	$44.99

Tired of your grinder vibration? Chances are the wheels are out of balance. These OneWay balancing systems are guaranteed to tame the wild grinder. The 5/8" arbor hole fits most 8" ginders, while the 1/2" arbor hole is for 6" grinders. Check yours before ordering. This system requires a 1" arbor hole in your grinding wheels. Supplied with parts to balance 2 wheels.

420-2272 5/8" Wheel Balancing System . $63.95
420-2524 1/2" Wheel Balancing System . $63.95

To Order Call 1-800/790-7980

Grinding Jigs & Accessories

The Wolverine grinding jig attaches to your grinder table, affording complete control for all grinding operations. The jig comes with two bases, an extender arm, and adjustable table rest. A diamond point wheel dresser is available to ensure flat, round wheels with clean cutting surfaces. The VariGrind jig fits in the extender arm and gives a perfect grind every time. Whether a fingernail grind for spindle gouges or a side grind on bowl gouges, the VariGrind jig will do it effortlessly.

.VariGrind adjusted for a fingernail grind.

VariGrind can be adjusted for both a side grind on a bowl gouge and a fingernail grind on a spindle gouge. This popular accessory is a must for novice & professional alike.

The Varigrind takes all the guesswork out of
putting a perfect side grind onto your bowl
gouges. A large Varigrind is available for
tools with a bar diameter greater than 5/8".

The diamond dresser allows you to effortlessly face your grinder wheel to be completely concentric to the grinder arbor. I also insures a perfectly flat face.

420-2291	Wolverine Grinding Jig	$87.95
420-2292	Diamond Dressing Jig	$65.95
420-2480	VariGrind Attachment	$52.95
420-2299K	Wolverine Grinding System	$186.99

The skew jig puts a flat-ground, straight bevel grind on your skew chisels. For those who prefer a hollow ground skew with a radiused edge (like me) use the standard table (seen here on the left wheel) and sweep the bevel across the wheel.

420-2690 .. Skew Grinding Jig $29.95

Oneway has now produced an accessory for the Wolverine System that allows you to sharpen flat tools like chisels and plane irons. Available as an add-on to your existing Wolverine or as a modular system (shown below) for those who don't need to sharpen turning tools.

420-3601 . . Flat Tool Jig . . $87.95
420-3572 . Flat Tool System . $109.95

Veritas Adjustable Grinder Rest, Grinding Jig and Skew Grinding Jig

405-M06.01	Grinding Jig	$28.95
405-M23.01	Veritas Grinder Tool Rest	$56.95
405-N13.01	Skew Grinding Jig	$27.95

CALL 1-800/790-7980 TO ORDER

CUTTING EDGE HOME PAGE

CATALOG HOME | TURNING | LATHES | CARVING | HAND TOOLS |

SHARPENING SUPPLIES | BOOKS